Picture
Improve your mobile coverage with Ag Smart Solutions we have a range of Cel-Fi Repeaters in stock  and ready for you.
The Cel-Fi Repeater has been tested, authorised and approved by Telstra for use on the Telstra Next G® Network.
They are designed to dramatically improve indoor voice quality and increase data speeds for 3G consumers.
​
Picture
Cel-FI GO                                                                                                
MOBILE
3G850 & 4G700/1800
Cel-Fi GO mobile for Telstra 3G & 4G

Nextivity's Cel-Fi GO is an intelligent in vehicle coverage solution for Telstra's Next G® and 4GX networks operating on 3G 850Mhz and 4G 700/1800 bands. It is designed to dramatically boost voice quality and increase data speeds for moving vehicle applications.
The Cel-fi GO differs greatly from the standard vehicle repeater due to its ability to not interfere with the mobile network or other users. Often referred to as a Smart Repeater, Cel-Fi GO has the ability to provide maximum coverage and be network friendly.
It does this in several ways by
  • continuously monitoring power levels of the cell tower it is connected to and constantly adjusting the Cel-Fi's output power to suit.
  • only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band.
  • not interfering with the carrier’s network or other users on the network.
  • having a unique installation process to eliminate feedback into the mobile network.

    Cel-Fi GO is covered by a 24 month warranty.
Important Note: Cel-Fi GO will boost a single band at a time (either 3G 850 or 4G 700 or 4G 1800). It is highly recommended to leave the GO in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.

Picture
Cel-FI GO                                                                                                 
STATIONARY
3G850 & 4G700/1800
 Cel-Fi GO stationary for Telstra 3G & 4G

The Cel-fi GO offers a more flexible installation over other Cel-Fi models due to the ability to run cables to where the signal is needed most. By not having a wireless link between two boxes GO can operate in areas that are saturated with Wi-Fi.

​Cel-Fi GO protects the mobile network in several ways by:
  • continuously monitoring power levels of the cell tower it is connected to and constantly adjusting the Cel-Fi's output power to suit.
  • only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band.
  • not interfering with the carrier’s network or other users on the network.
  • having a unique installation process to eliminate feedback into the mobile network.

    Cel-Fi GO is covered by a 24 month warranty.
Important Note: Cel-Fi GO will boost a single band at a time (either 3G 850 or 4G 700 or 4G 1800). It is highly recommended to leave the GO in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones
Picture
  Cel-Fi PRO for Telstra
  3G850 & 4G700/1800  
  Cel-Fi pro for Telstra 3g & 4g
​
  The Cel-Fi Repeater has been tested, authorised and approved by Telstra for use on the Telstra Mobile    Network.
  Nextivity's third generation Cel-Fi PRO is a cost-effective and intelligent indoor coverage solution for  Telstra's Next G, 4G and 4GX networks operating on 3G 850Mhz and 4G 700/1800 bands. It is designed to dramatically boost indoor voice quality and increase data speeds for HSPA or LTE consumers.
The Cel-fi PRO differs greatly from the standard indoor repeater due to its ability to not interfere with the mobile network or other users. Often referred to as a Smart Repeater, the Cel-Fi has the ability to provide maximum coverage, be network friendly and can be easily installed by the end user.
It does this in several ways by
  • continuously monitoring power levels of the cell tower it is connected to and constantly adjusting the Cel-Fi's output power to suit.
  • only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band.
  • not interfering with the carrier’s network or other users on the network.
  • having a unique installation process to eliminate feedback into the mobile network.
Cel-Fi PRO is covered by a 24 month warranty

Picture
Cel-Fi for Telstra                                                                     NO LONGER AVAILABLE 
3G850
​Cel-Fi RS2 for Telstra 3G 850MHz

The Cel-fi RS2 differs greatly from the standard indoor repeater due to its ability to not interfere with the mobile network or other users. Often referred to as a Smart Repeater, the Cel-Fi has the ability to provide maximum coverage, be network friendly and can be easily installed by the end user.

The Cel-Fi Repeater has been tested, authorised and approved by Telstra for use on the Telstra Next G® Network.
Nextivity's second generation Cel-Fi RS-2 is a cost-effective and intelligent indoor coverage solution for Telstra's Next G network operating on the WCDMA 850Mhz band. It is designed to dramatically improve indoor voice quality and increase data speeds for 3G consumers.

It does this in several ways by
  • continuously monitoring power levels of the cell tower it is connected to and constantly adjusting the Cel-Fi's output power to suit.
  • only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band.
  • giving the service provider the ability to shut down the repeater remotely if needed, using a signal from the base station.
  • not interfering with the carrier’s network or other users on the network.
  • having a unique installation process to eliminate feedback into the mobile network.
The Cel-Fi RS2 is covered by a 24 month warranty.